Grinding Wheels and Bonded Abrasives: China GB Standards

Last updated: 20 November 2026.

Direct answer. China's GB register returns 56 standards for the term "grinding wheel": 34 in force, 21 withdrawn, one pending. Wheel dimensions are governed by the GB/T 4127 series, five parts of which were re-issued in 2025–2026. All three mandatory entries are withdrawn, so machine safety sits in the GB/T 3883 series.

Abrasive products are among the least glamorous categories in a China sourcing file and among the easiest to specify wrongly. A wheel is defined by a shape, a size, a bond and a maximum speed, and the Chinese standards system splits those properties across a dimension series, a terminology standard, a balance standard and a set of product-specific standards. Buying "a 200 mm wheel to GB standard" therefore means very little until you name a part and a year.

This page works from one source only: the National Standards Information Public Service Platform run by SAMR, queried for the Chinese term on 20 November 2026. It returned 56 records, all 56 retrieved with no shortfall, and the counts below are counts of that result set — not of China's entire abrasive catalogue, which is larger.

What the register returns, by status

StatusCountShare
In force3461%
Withdrawn2137%
Pending (not yet effective)12%

By nature, 53 are recommended (GB/T) and three are mandatory (GB). The three mandatory entries are all withdrawn: a 1989 workplace dust hygiene standard, a 1996 safety standard for bench grinders, and a 1991 safety standard for hand-held grinders. In other words, this result set contains no currently valid mandatory national standard for the wheel itself — a point worth checking against the product family you are actually buying rather than generalising.

The dimension series is where orders go wrong

GB/T 4127 — bonded abrasives, dimensions — is the series a purchase order normally needs. Fifteen parts appear in this result set, and their vintages are not uniform.

PartScope in the registerCurrent version effective
1External cylindrical grinding, workpiece between centres2007-11-01
2Centreless external grinding2007-11-01
3Internal grinding2007-11-01
4Surface grinding, peripheral wheels2009-01-01
5Surface grinding, cup wheels2009-01-01
6Tool and toolroom grinding2009-01-01
7Manual grinding2009-01-01
8Deburring, snagging and rough grinding on fixed machines2026-09-01 (replaces the 2007 part)
9Heavy-duty grinding2026-09-01 (replaces the 2007 part)
12Deburring and snagging on straight grinders2009-01-01
13Deburring and snagging on vertical grinders2009-01-01
14Deburring, snagging and rough grinding on angle grinders2026-01-01 (replaces the 2008 part)
15Cutting wheels for fixed or movable cutting machines2026-02-01 (replaces the 2007 part)
16Cutting wheels for hand-held power tools2026-02-01 (replaces the 2007 part)
18Edge grinding of flat glass2018-07-01

Five parts — 8, 9, 14, 15 and 16 — are 2025 or 2026 issues whose effective dates fall across three different months. That staggered timing matters commercially: between January and September 2026, two buyers of the same nominal wheel could each believe they were specifying the current standard and still be a part number apart. The practical fix is to write the part number and the year into the drawing, not just the series.

Note also what this table does not show: the register did not return parts 10, 11 or 17 for this keyword. Their absence here says nothing about whether they exist.

Withdrawn, and what replaced what

Some successions are explicit in the register, and those are the ones you can rely on.

TopicWithdrawnIn force
Terminology of wheel grindingGB/T 17588-1998GB/T 17588-2025 (2026-01-01)
Permissible imbalance of delivered wheelsGB/T 2492-2003GB/T 2492-2017 (2018-07-01)
Wheels for grinding steel ballsGB/T 23541-2009GB/T 23541-2017 (2018-07-01)
Wheel undercut reliefGB/T 6403.5-1986GB/T 6403.5-2008 (2009-05-01)
Flanges for clamping plain wheels on machine toolsGB/T 21013-2007GB/T 21013-2025 (2026-05-01)
Tolerances for diamond and CBN wheels and mounted pointsGB/T 23537-2009GB/T 23537-2021 (2021-12-01)

Two withdrawals have no successor row in this result set at all: GB/T 2485-1997, the technical conditions for plain bonded wheels, and GB/T 2489-1984, thin wheels. That is the trap in register work. A blank successor column means the platform has not recorded one for this query — it does not mean the requirement disappeared, and it certainly does not license shipping to a withdrawn specification. Ask the supplier which standard the drawing actually invokes, and confirm with a test house before you accept a certificate.

The flange standard is easy to overlook and expensive to miss: wheel mounting hardware is a separate standard from the wheel, and the 2025 revision only becomes effective in May 2026.

Superabrasives: where the newest standards are

The most recent product standards in this set are not about conventional wheels at all. They address diamond and CBN products for precision industries:

For a buyer sourcing wheels for tool rooms or semiconductor supply chains, that cluster is the relevant one, and it is newer than anything in the conventional dimension series. For general metalworking, the 4127 parts and the balance and terminology standards are the operative set.

The register is noisy: wheels versus machines

A query on the Chinese term returns the tool as well as the product. In this set, more than a dozen records concern grinding machines and power tools rather than abrasive wheels — a straight grinder standard, safety requirements for die grinders, vibration test methods for hand-held grinders, and the general safety series for hand-held and transportable power tools. One record is neither: GB/T 1768-2006, a paint and varnish abrasion test that uses a rotating rubber wheel.

That noise is not a defect in the register; it is a defect in reading it. A buyer who counts 56 "grinding wheel standards" and expects 56 wheel specifications will mis-scope the category. Count the wheel records, then treat the machine records as a separate compliance question.

Where safety sits now

Because the mandatory entries are withdrawn, machine-side safety is carried by recommended standards that are widely referenced in contracts:

A "recommended" label does not make these optional in practice: Chinese buyers write them into contracts, and European importers map them onto the machinery directive's thinking. What the label does mean is that the obligation comes from the contract rather than from the standard's own legal status.

What this page does not tell you

Source note. One first-party source: the National Standards Information Public Service Platform (SAMR) standard register, queried for the Chinese term for grinding wheel on 20 November 2026. The query returned 56 records and all 56 were retrieved, with no shortfall; status and effective-date counts on this page are counts of that set. The register is a bibliographic record — confirm applicability and conformity with a test house or your supplier before relying on it in a contract.

For the adjacent categories, see the couplings register walkthrough, which shows the same register method applied to a mechanical part, and the fasteners page for the thread-standard equivalent. Buyers comparing process routes rather than products should start from the manufacturing index, and the GB standards overview explains how GB, GB/T and GB/Z differ.

Frequently asked questions

Which GB standard covers grinding wheel dimensions?

The GB/T 4127 series. Fifteen parts appear in this register query, five of which were re-issued in 2025 or 2026 — parts 8 and 9 effective 2026-09-01, 14 from 2026-01-01, 15 and 16 from 2026-02-01.

Is GB/T 2485-1997 still valid for grinding wheels?

No. The register shows it as withdrawn, and no replacement row appears in this result set. Treat that as a gap in the record and confirm the applicable standard with your supplier or a test house.

Are there mandatory GB standards for grinding wheels in China?

All three mandatory entries returned for this keyword are withdrawn. Machine safety is carried by recommended standards instead, including GB/T 3883.305-2021 for bench grinders and GB/T 3883.203-2025 for hand-held grinders, effective 2026-05-01.

Which standard covers diamond and CBN wheels?

GB/T 23537-2021 sets limit deviations and runout tolerances for diamond and CBN wheels and mounted points. Product standards for ceramic-bond CBN camshaft and crankshaft wheels, CNC tool grinding, chip dicing and wafer grinding were issued between 2022 and 2024.

Does this register list only grinding wheels for that keyword?

No. The query also returns standards for grinding machines, hand-held power tools and a paint-abrasion test method, because the Chinese term covers the tool as well as the wheel.

Sources

All sources retrieved 20 November 2026. This page is an independent reading of the sources listed; the official pages themselves are the specification.

Fact used on this pageSource
S1 — 56 records for the grinding-wheel keyword; 34 in force, 21 withdrawn, 1 pending; 53 recommended and 3 mandatory; all three mandatory withdrawn (1989 workplace dust hygiene, 1996 bench-grinder safety, 1991 hand-held grinder safety)National Standards Information Public Service Platform (SAMR), standard register query, retrieved 20 November 2026 https://std.samr.gov.cn/gb/search/gbQueryPage
S2 — GB/T 4127 parts 1–9, 12–16 and 18 with their current effective dates; parts 8 and 9 (2026-09-01), 14 (2026-01-01), 15 and 16 (2026-02-01) replacing 2007/2008 versionsSame register query, retrieved 20 November 2026 https://std.samr.gov.cn/gb/search/gbQueryPage
S3 — Succession pairs: GB/T 17588-1998 → 2025; GB/T 2492-2003 → 2017; GB/T 23541-2009 → 2017; GB/T 6403.5-1986 → 2008; GB/T 21013-2007 → 2025 (effective 2026-05-01); GB/T 23537-2009 → 2021Same register query, retrieved 20 November 2026 https://std.samr.gov.cn/gb/search/gbQueryPage
S4 — GB/T 2485-1997 and GB/T 2489-1984 both withdrawn with no successor row in the result setSame register query, retrieved 20 November 2026 https://std.samr.gov.cn/gb/search/gbQueryPage
S5 — Superabrasive product standards: GB/T 41357-2022 (2022-10-01), GB/T 43132-2023 and GB/T 43136-2023 (2024-04-01), GB/T 44687-2024 (2025-04-01)Same register query, retrieved 20 November 2026 https://std.samr.gov.cn/gb/search/gbQueryPage
S6 — Machine and power-tool entries in the same result set: GB/T 3883.305-2021 (2021-11-01), GB/T 3883.203-2025 (2026-05-01), GB/T 32800.9-2023 (2024-06-01), GB/T 26548.1-2026 pending (2027-03-01) with GB/T 26548.1-2018 in force; GB/T 1768-2006 paint abrasion testSame register query, retrieved 20 November 2026 https://std.samr.gov.cn/gb/search/gbQueryPage