Last updated: 16 November 2026.
Direct answer. In the national standards register, seven roller chain standards are current and six are withdrawn. The short-pitch family now sits on GB/T 1243-2024; the fatigue test method moves to GB/T 20736-2025 from 1 July 2026. All thirteen records are recommended standards, not mandatory ones.
A roller chain is a commodity until it fails, and then it is a liability question. That is why the standard number on the drawing matters more than the pitch: it decides which dimensional table the chain was built to, which test method the report was run under, and — when something breaks — which document governs.
This page reads one register query and nothing else. Every status, date and code below comes from the national standards register as retrieved on 16 November 2026, and every claim is limited to what those records say.
The register query for the roller chain family returned 13 records, all 13 retrieved, with no pagination shortfall. The split is seven current, six withdrawn, and every one of the thirteen is marked as a recommended standard rather than a mandatory one.
That last point deserves a sentence of its own. Buyers sometimes ask for a "compulsory GB standard for chains" and treat its absence as a red flag. In this family there is no compulsory national standard to point at: conformity is established by the contract, the drawing and the test report, with the GB/T documents supplying the definitions everyone agrees on.
| Status | Count | Meaning for a purchase order |
|---|---|---|
| Current | 7 | Can be cited as the governing standard |
| Withdrawn | 6 | Superseded; citing one signals an old drawing |
| Mandatory | 0 | No compulsory national standard in this set |
The core transmission chain standard has three generations in the register, and only the newest is current.
| Edition | Status | Effective date | Scope as titled in the register |
|---|---|---|---|
| GB/T 1243-2024 | Current | 2024-12-01 | Short-pitch precision roller chains, bush chains, attachments and sprockets for transmission |
| GB/T 1243-2006 | Withdrawn | 2007-05-01 | Same product scope |
| GB/T 1243-1997 | Withdrawn | 1997-12-01 | Short-pitch precision roller chains and sprockets for transmission |
This is the single most common mismatch in a chain enquiry. A drawing library that has not been touched since the 2006 edition will keep quoting it, and the quotation will look correct because the chain still fits. The dimensional change between generations may be small or nil — the register does not say — but the cited document is withdrawn either way, and a buyer signing off on a withdrawn standard owns that choice.
The same pattern repeats in the conveying branch: GB/T 5269-2008 is current for double-pitch precision roller chains, attachments and sprockets, while GB/T 5269-1999 is withdrawn.
Not every old code is dead, and this is where a status field beats intuition.
| Standard | Status | Effective date | Scope as titled in the register |
|---|---|---|---|
| GB/T 5858-1997 | Current | 1997-12-01 | Heavy-duty cranked-link roller chains and sprockets for transmission |
| GB/T 10857-2005 | Current | 2006-04-01 | S-type and C-type steel roller chains, attachments and sprockets |
| GB/T 18150-2006 | Current | 2007-05-01 | Guide to the selection of roller chain drives |
GB/T 5858-1997 has been current for nearly three decades. A supplier who assumes that a 1997 code must be obsolete will "update" a heavy-duty cranked-link specification to a standard that does not cover the product at all — a worse outcome than leaving it alone.
The selection guide is the other one worth knowing. GB/T 18150-2006 replaced GB/T 18150-2000 and is the document that tells an engineer how to size a drive rather than what a link must measure. If a quotation offers a chain size without showing the drive calculation behind it, the selection guide is the part of the standard set that has been skipped.
One record in this family has a future effective date, which is easy to misread as a current requirement.
GB/T 20736-2025 covers fatigue test methods for transmission precision roller chains and leaf chains, carries an effective date of 1 July 2026, and is the only current edition in that line — GB/T 20736-2006 is withdrawn. A fatigue report that cites the 2006 edition is therefore citing a withdrawn document, and one that claims to follow the 2025 edition before 1 July 2026 is claiming a method that is not yet in effect.
If a fatigue life figure appears in your quotation, ask which edition the test was run to and when the report was issued. Those two dates are the only way to know whether the number is comparable with the next supplier's number.
GB/T 6069-2017 covers roller chain couplings, the shaft-to-shaft application of the same chain, and it replaced GB/T 6069-2002. A chain coupling drawing that still carries the 2002 code is in the same position as a 2006 chain drawing.
Chain couplings are also where the family boundary blurs: the product is a coupling, the component is a chain, and the dimensional standard for the chain itself is a different document. When a supplier quotes "chain coupling to GB/T 6069", the question to ask is which chain standard sits underneath it.
Searching the register for the bare word for chain returns a wider set than the product family: 17 records rather than 13, because the term also appears in coal quality standards for chain-grate boilers, in a terminology standard covering chains and sprockets, and in bicycle and motorcycle chain product standards.
Three of those extra records are coal specifications for stoker-fired boilers — a completely different industry that happens to share a word. Two more are vehicle chain standards with their own test regimes. None of them belong in a hardware enquiry about transmission or conveyor chain.
The lesson is mechanical rather than linguistic: search on the product term that the standard titles actually use, then read the titles. Counting results and calling it a family is how a 17-record "chain market" gets built out of 13 chain standards and three coal specifications.
Four checks, in order, take about ten minutes:
If the chain drives a sprocket you are also sourcing, the sprocket standards page covers the matching half of the pair, and the gear and reducer pages cover the gearbox side. For the general question of how GB/T numbering and status work, the GB standards guide explains the register itself. When the drawings are ready, the quotation route takes a specification pack, and the inspection guide explains how to test what arrives against the standard you cited.
For short-pitch transmission chains the current edition in the national register is GB/T 1243-2024, which took effect on 1 December 2024. Drawings that still cite GB/T 1243-2006 or GB/T 1243-1997 are citing withdrawn editions.
In the register query used for this page all thirteen roller chain records are marked recommended rather than mandatory. No compulsory national standard appears in that result set, so the obligation comes from the contract and the drawing, not from a mandatory GB.
No. GB/T 5858-1997, covering heavy-duty cranked-link roller chains and sprockets, is listed as current with an effective date of 1 December 1997. Age alone is not evidence: the register status field is.
GB/T 5269-2008, covering double-pitch precision roller chains, attachments and sprockets for transmission and conveying, effective 1 February 2009. The 1999 edition is listed as withdrawn.
Yes. GB/T 20736-2025, covering fatigue test methods for transmission precision roller chains and leaf chains, carries an effective date of 1 July 2026 and the 2006 edition is listed as withdrawn. A test report citing the 2006 edition is citing a withdrawn document.
All sources retrieved 16 November 2026. This page is an independent reading of the sources listed; the official pages themselves are the specification.
| Fact used on this page | Source |
|---|---|
| S1 — All thirteen roller chain records: standard codes, titles, status (current or withdrawn), nature (recommended), effective dates, and the 13-of-13 retrieval with no pagination shortfall | National standards register, query for the roller chain product family, retrieved 16 November 2026 https://std.samr.gov.cn/gb/search/gbQueryPage |
| S2 — Wider keyword result set of 17 records and the presence of boiler coal, terminology and vehicle chain standards in it | National standards register, query for the bare chain term, retrieved 16 November 2026 https://std.samr.gov.cn/gb/search/gbQueryPage |